Last Thursday, I showed you a fun and vibrant little makeover I did on an IKEA Tarva dresser with extra-wide washi tape as part of a blog hop I did with my friends! Well, covering the dresser in tape was just one of the many ideas I had for this blank slate of a furniture piece, so I thought I would turn my ideas into a fun series of their own. Introducing 1 Dresser | 4 Totally Temporary Transformations…and today I’m showing you the next temporary look I came up with. This time around, I’m covering the dresser drawers in fabric, and the result couldn’t be any sweeter!

1 Dresser, 4 Temporary Transformations | How to Make a Fabric-Covered Dresser

Each time I set off on ANY furniture transformation, I certainly have an idea and a vision, but no sure way to know how it will look when all is said and done. And what a sweet reward it is when the results are even better than you pictured. I think that’s why I love making over furniture so much. You never quite know what you’re going to get, but the results are always so dramatic!

1 Dresser, 4 Temporary Transformations | How to Make a Fabric-Covered Dresser

Red Floral Fabric-Covered Dresser

“Vintage-cutesy-chic” is not really a look I use in my own home a lot…but there is just something so fresh and wonderful about this floral and dot fabric paired with the hot red base and pulls…I really wish I had a place for it and a reason to keep it!

Fabric-Covered Dresser

I banished red from my house years ago because I find it very difficult to decorate around, but this little lady sure is making me re-think that choice. Can you tell I’m just smitten with this makeover?!?

Fabric-Covered Dresser

Catch Up!

Just to re-cap from last week, I purposely bought this inexpensive little pine dresser for the sole purpose of giving it several different makeovers. I started by assembling it according to the directions…

IKEA Tarva Dresser

To give myself some makeover options, I chose to keep the drawers plain wood and paint the outside frame of the dresser white. You can read more about my process HERE.

IKEA Tarva Hack with Washi Tape

I then gave it a makeover with rolls of extra-wide washi tape to give it a “Rugby stripe” effect. (See that makeover HERE!)

Rugby Striped Dresser With Washi Tape

I loved the stripes so much, but the goal for this dresser was to show you all a bunch of different and completely TEMPORARY ways to change up your furniture. So, to show you how temporary that tape really was…have a look! It peeled right off without any residue. In literally minutes, I was back to my un-decorated dresser, ready for its next look!

How to Make a Fabric-Covered Dresser | Prep

Prepping the IKEA Tarva Dresser

I know I’m showing you temporary techniques in this series, but I also wanted to create really fun furniture transformations that would inspire you. And as you know, I also tend to get carried away and get ideas stuck in my head. As such, I decided to give the base of my dresser a coat of red paint. This is obviously NOT temporary and completely optional…I just liked the added detail. If you’d like to do the same, here’s how I did it:

Prep the dresser for a new coat of paint by sanding down the glossy finish slightly and wiping away the dust…

How to Make a Fabric-Covered Dresser | Sand and Dust

Next, tape off the base from the rest of the dresser. The IKEA Tarva dresser has a clear break in the pieces here, so I just followed the line in the wood.

How to Make a Fabric-Covered Dresser | Tape

Next, give the base of the dresser 1-2 coats of paint in the color of your choice (I used Whip Lash by Behr Marquee).

How to Make a Fabric-Covered Dresser | Paint

While you have your paint out, go ahead and paint the knobs in a matching or coordianing color. Placing the knobs onto kabob skewers makes the painting and drying process super simple!

How to Make a Fabric-Covered Dresser | Paint the Knobs

How to Make a Fabric-Covered Dresser | Painted Knobs

If you did choose to paint any parts of your dresser or knobs, you can continue on with covering the drawers in fabric while they dry.

How to Cover Dresser Drawers in Fabric

Covering these dresser drawers in fabric was quicker and easier than I expected it to be!

Here is what you need:

Start by determining how much fabric you will need by measuring the height and width of the drawers. Add 2″ to each direction to account for folding/wrapping around to the back.

How to Make a Fabric-Covered Dresser | Measure Drawer Fronts

Once you have your dimensions, use a scissors or rotary cutter/mat to trim the fabric down to your desired dimensions (don’t forget to add at least 2″ in both directions!)

How to Make a Fabric-Covered Dresser | Cut Fabric

Next, use a hot iron to get out any and all wrinkles. Then, fold each edge up 1/2″ and iron in place.

How to Make a Fabric-Covered Dresser | Iron Fabric

With all four edges folded and ironed, place it right-side down onto your work surface. Then place your drawer front down onto the fabric. Fold the fabric over the edge of the drawer front and secure it with a staple gun. Take your time, and pull the fabric taught as you go to ensure there are no wrinkles when you are done. (Note: I did the two shorter sides first, then the two longer sides… and I ended up with no wrinkles at all!)

How to Make a Fabric-Covered Dresser | Staple Fabric to Drawer Fronts

At the corners, fold the fabric to create nice flat triangles and secure to the inside of the drawer with more staples. So as not to affect how the drawers close, trim away excess fabric as necessary to make the folds as flat as possible.

How to Make a Fabric-Covered Dresser | Staple Fabric to Drawer Fronts

Repeat on all your drawer fronts!

How to Make a Fabric-Covered Dresser | Staple Fabric to Drawer Fronts

Once your knobs are dry, add them back onto the drawers. From the inside of the drawer, puncture a hole in the fabric with a seam ripper and then carefully thread the screw through the opening. Work slowly so as not to get snags or runs in your fabric!

How to Make a Fabric-Covered Dresser | Replace Knobs

The final step is to slide the drawers back into the dresser! This was the moment of truth…I was really worried the drawers wouldn’t close, slide or sit even…

How to Make a Fabric-Covered Dresser | Staple Fabric to Drawer Fronts

Phew! They slide just fine, and they sure look nice, clean, and even!

How to Make a Fabric-Covered Dresser | Staple Fabric to Drawer Fronts

How to Make a Fabric-Covered Dresser

I wasn’t sure how I was going to style this dresser since it really doesn’t match my house at all. How fun that I hung on to these canisters and bread box (from Target!). They sure do complete the whole look and feel of the piece, don’t they?!?

How to Make a Fabric-Covered Dresser | Styling

A Few Things to Consider Before Covering Your Drawers in Fabric

Admittedly, the IKEA Tarva design lends itself perfectly for this kind of makeover. Here are some things to think about when deciding if covering drawers in fabric will work on your dresser:

  • Are the drawers flat or rounded? Flat drawers certainly make this easier, but I DO think it could work on rounded drawers. Just be prepared for more stapling along the inside of the dresser. If your drawers have a beveled edge, consider wrapping them in light batting before adding the fabric to conceal the varied edges.
  • Do the drawer fronts sit inside or outside of the dresser frame? Notice how these drawer fronts sit OUTSIDE the dresser frame, so there is no concern that the added bulk of the fabric on the edges would affect how the drawers fit together. If your drawers sit into the frame of the dresser, practice first with some scrap fabric to make sure the drawers close right before covering them all!
  • Do the drawer fronts have a lip all the way around? In order to staple the fabric to the inside of the drawer, make sure the drawers have enough of a lip ALL the way around the drawer front. If the sides of the drawer are the exact same height as the front panel, it may be difficult to wrap the fabric neatly.
  • What is the repeat of your pattern? Matching patterns on a piece like this would be tricky. Not impossible, but quite challenging. To save me the headache, I picked a piece that had a random all-over pattern. I certainly didn’t take time to match the patterns from one drawer to the next, but since the pattern is so varied, you really can’t tell and/or it’s not really bothersome. However, a stripe or geometric might not be so forgiving. With these patterns, be sure to buy excess fabric to accommodate pattern repeats as necessary.

How to Make a Fabric-Covered Dresser

One thing I was really excited about with this makeover was how cheap it was! I was able to cover all three of my drawers with a single yard of fabric that I got at Hobby Lobby with a coupon. Not counting the paint, covering the drawers with fabric cost me about $6! Talk about a quick, easy, AND cheap way to give a piece of furniture an entire new look! If you have a piece of furniture that doesn’t match your decor but you don’t want to/can’t paint it, consider covering it in fabric instead! I can think of so many different pieces this technique could work on!

How to Make a Fabric-Covered Dresser

I’d love to know what you guys think of this transformation! Have you ever considered covering a piece of furniture in fabric? What do you think I’m going to do with this dresser next! I have a fun plan up my sleeve and can’t wait to see it come to life. That is, if I can bring myself to pull off that super sweet fabric!

See you back here Saturday with my next military lifestyle post!

Megan Signature

See You Soon!
Megan